碳化钒析出对X80管线钢焊接热影响区韧性的影响

通过Gleeble-3500热模拟机对钒(V)含量分别为0.06%和0.02%的X80管线钢进行了峰值温度为1350℃和750℃的焊接热模拟试验,利用硬度计和光学显微镜(OM)分别分析了焊接热模拟试样硬度和试样中马氏体-奥氏体岛状组织(M-A)的数量、尺寸和形貌。利用透射电镜(TEM)对母材、粗晶区和部分相变区中粒子析出进行了表征。结果表明,与0.02%含V量X80管线钢相比,0.06%含V量的X80管线钢由于V含量较高,在受到多道次焊接热循环影响时,部分相变区有较大量碳化钒(VC)粒子析出,明显阻碍位错运动,使其强度明显提高的同时脆性增大、塑性变形难以进行,导致其焊接热影响区韧性下降。     

藏族风情自驾旅游区概念规划——以四川松潘县林坡村为例

四川省甘(孜)—阿(坝)民族地区自然环境优美,民族文化浓郁,旅游资源丰富,近年来吸引了大批自驾游客。甘(孜)—阿(坝)地区松潘县川主寺镇林坡村基于生态和少数民族特色村寨保护的理念,围绕区域"硬资源"(自然景观)和"软资源"(民族特色风情)来构建旅游发展格局,形成了民族特色鲜明、生态可持续发展的体验式自驾旅游区。     

空间H形梁柱节点的节点域滞回性能试验研究

为研究空间效应对节点域滞回性能及稳定性的影响，设计了4个不同构造的空间H形梁柱节点试件，于柱端施加恒定轴向荷载，于柱弱轴平面梁端施加恒定反对称荷载，于柱强轴平面梁端施加反对称往复荷载。试验及分析结果表明：基于平面梁柱节点试验提出的考虑竖向连接板对提高节点域稳定性的推荐公式仍适用；柱弱轴平面不平衡弯矩通过竖向连接板及横向加劲肋传递至柱翼缘，当该荷载不致引起节点域周边构件过早屈服时，若传力路径连续，节点域不直接抵抗该荷载作用；在本试验的柱弱轴平面荷载应力水平下，构造设计合理的空间试件节点域的承载力、变形能力、稳定性、耗能能力均不低于相应的平面试件。     

Q235B带钢边裂分析

通过对带钢Q235B边裂缺陷进行检验和分析,认为造成此次带钢边裂的主要原因是铸坯边部细小裂纹、深振痕、皮下气泡、针孔以及轧钢划伤引起的,通过采取措施减少铸坯边部缺陷和划伤,可以减少边裂缺陷。     

Crack propagation behavior of solution annealed austenitic high interstitial steels

Austenitic stainless steels provide a beneficial combination of chemical and mechanical properties and have been used in a wide field of applications for over 100 years. Further improvement of the chemical and mechanical properties was achieved by alloying nitrogen. But the solubility of N within the melt is limited and can be increased in substituting Ni by Mn and melting under increased pressure. In order to avoid melting under pressure and decrease production costs, a part of N can also be substituted by C. This leads to austenitic high interstitial steels (AHIS). Within the solution annealed state strength and ductility of AHIS is comparable or even higher of those of AHNS and can be further improved by cold working. Unfortunately the endurance limit does not follow this trend as it is known from cold-worked austenitic CrNi steels. This is due to the differences of the slip behavior which is governed by the stacking fault energy as well as other near field effects. Construction components operating under cyclic loads over long periods of time cannot be considered being free of voids or even cracks. Thus the crack propagation behavior is of strong interest as well. This contribution presents the tensile, fatigue, crack propagation and fracture toughness properties of AHNS and AHIS in comparison to those of CrNi-steels. The differences are discussed in relation to microstructural characteristic as well as their alterations under cyclic loading.     

空间经济学视角下城郊型开发区产城融合路径

首先从空间经济学视角分析了产城关系演变中的土地价值损失的形成及弥补过程,提出产城冲突下价值损失的构成、影响因素及扩大机制。随后,围绕价值损失的补偿方式指出了产城融合的三条路径,并对现实中各类路径的应用给出了宏观及微观解释——我国城镇化和工业化发展的阶段性变化、不同类型产业的产出效率及其就业人群需求差异是路径选择的决定性因素。最后,本文指出了进一步的研究方向,即通过合理的制度安排,减少产城融合过程中不同主体之间利益再分配所需的交易成本。     

Structural fatigue crack growth on a representative volume element under cyclic strain behavior

By introducing parameters λ and ω into the crack tip field, a unified cyclic stress and strain field was first formulated by using the Hutchinson-Rice-Rosengren (HRR) field and the Rice-Kujawski-Ellyin (RKE) field under plane stress states in the present study. On the basis of the plastic strain energy and the linear damage accumulation, two fatigue crack growth models without any artificial parameters were then proposed from a representative volume element of cyclic strain behavior. The fatigue crack growth model included parameters λ and ω which showed the effect of two singularity fields. In addition, a simplified structural fatigue crack growth model was eventually established in terms of the fatigue life of each point on the crack front and the non-self-similar shape evolution law. Finally, the predictions of models are compared with the experimental data and the agreement is found to be fairly good.     

Origin of stress overshoot in amorphous solids

Based on the shear-transformation-zone (STZ) theory, we propose a constitutive model for describing homogeneous elastoplastic deformation of amorphous solids where the interaction of shear transformations and free volume dynamics is incorporated. This theoretical model can reproduce the stress overshoot behavior that shows the dependence of strain rate, temperature, STZ population and dilatancy of systems. It reveals that the stress overshoots its steady state value due to the delayed activation of shear transformations that results from the insufficient free volume in the system. However, the subsequent strain softening (stress drop) is attributed to the shear-induced dilatation that is a result of the positive interplay between shear transformations and free volume creation, the latter playing the dominant role. Our analysis also demonstrates that the STZs, as basic carriers of amorphous plasticity, govern the yielding of the system, whereas the free volume dynamics significantly affects the post-yielding behaviors.     

Characterisation of crack-tip fields in biaxial fatigue based on high-magnification image correlation and electro-spray technique

This work presents a novel methodology for characterising fatigue cracks under biaxial conditions on a low carbon steel. It allows both short crack and early propagation stages to be studied in tubular specimens. Short crack growth is studied with a long-distance microscope acquiring images of the bare metal surface. Results showed oscillations in crack growth rate due to microstructure. Early propagation stage is studied with high magnification Digital Image Correlation (DIC) technique for measuring displacement and strain crack-tip fields. By applying micro-speckle pattern on the metal surface it is possible to achieve high magnification for DIC technique. Ultra-fine black and white speckles were created by electro-spray technique. The validity of this novel technique is demonstrated by direct comparison with extensometer measurements, under combined tension–compression and torsion conditions. It was also possible to estimate satisfactorily the mixed-mode stress intensity factor.